SuperCube

Blargaman91

Well-Known Member
This is really just a modded GameCube I made, so nothing new.

The front of it:
kdu2z4.jpg


The SD card in the top right corner is a WiiKey Fusion SD card. This system does still have a disc drive; it is connected to the DVD side of the WiiKey, so it will function when you remove the SD card.

And the back:
28sc2l5.jpg


In the top left is a 3.5mm jack for audio with VGA. Down near the bottom there is a switch for VGA/component output.

It all looks a little banged up, partly because the only GC shells I had we're used ones in bad condition, and also because I am not the most careful person :roll: . I wanted to add internal A and B SD gecko slots but I couldn't find places for both of them. I'm still wondering how I can fit those in...

*...credit to diminuendo for WKF SD slot placement
 
Re: The Super-ish Cube

Jeez, I'm already having problems... I turned it on a minute ago to find that the component output looked a little bluish, and after trying to boot a game, the output went blank. So I tried VGA and found it worked, but it was missing any Green signal altogether. I took it apart to see what was wrong, found nothing, put it back together, and now the video output works. But it looks strangely pixelated, kind of like it was "painted" on there. It's odd, and I feel like my component board could be broken. How could that have happened? That would be pretty devastating if it is.

qxl5k2.jpg


2h2p65i.jpg


The strange pixelated look goes away in progressive scan mode (these are both 480i). Additionally, the bios menu sometimes won't display in component video mode. No idea what's going on.
 
Back
Top