Steve's Ps2P

[TechSteve]

Ok making a ps2 portable (wewt) will have no disk drive.
what color should i paint it?
what should i name it?
and what would be a good case for it?
already have good screen (anti glare removed)
tested and working free mcboot and opl,usb advance ect installed boots games from usb flash drive.

 

[Hugo_Peters]

 

[TechSteve]

Ok done more testing with screen, thinking about using this for a case http://www.polycase.com/zn2 the 240 one,i think a scph 79001 should fit in that right? and ill be using two 3.7v lithium ion batteries: http://www.batteryspace.com/polymer...6474-2c185wh10arateullisted.aspx?SSAID=314743 This pcb http://www.batteryspace.com/pcbfor1...-1alimitwithfuelgaugesocket.aspx?SSAID=314743
and this charger http://www.batteryspace.com/smartch...pack--ullisted.aspx?SSAID=314743&SSAID=389818
will these batteries be powerful enough? the screen will run off of anything up to 12 volts even all the way down to 5 so that means no regulator for the screen,and no screen problems at all perfect picture (after i removed that pesky ant glare)
the screen board is really small(its the size of the screen) and the control board is also very small also that big video input board can o(of course) be completely done away with . I was just wondering if i can fit all of this in a zn240 case?

 

[TechSteve]

update,ok well i think i may have found a beast of a battery! iy says it already has the pcb installed so that means i dont need a pcb right? does anyone know of a good voltage regulator to step it down to 8.5 volts?

 

[Hugo_Peters]

update,ok well i think i may have found a beast of a battery! iy says it already has the pcb installed so that means i dont need a pcb right? does anyone know of a good voltage regulator to step it down to 8.5 volts?

If it's from eBay: DON'T DO IT.

 

[TechSteve]

Nope its from batteryspace its a 11.5 volt lithium polymer battery pack with its own built in pcb.

 

[bentomo]

Nice, I hope this project goes well. There aren't enough ps2 portables around.

 

[XCVG]

Texas Instruments is your friend. This one, among others, should work.

 

[TechSteve]

Texas instriments? does anyone know if i need a pcb for this battery (it says it already has one)
also will all of this fit in a zn40 case?EDIT: ordered logitech controller ,loots of ide cable,rubber tacts,and the zn40 case.

 

[Kyosho]

It has one.

 

[TechSteve]

thanks not kyo i didnt want to have to worry about it exploding haha
UPDATE picked up some perf board,bondo,spot filler sandpaper, krylon and, rustolium.
Another update! my screen stopped working!(yay) so i ordered a new one(17 dollers<shipping incuded)
also i might be ordering one of these screens-->http://tinyurl.com/3vdtofu