Kid's first Gamecube Portable (Battery Cube)

[KidBuilder1]

So now i decided to make a GCp and its going to be my first!

My case is a ZN-45 or Zn-40 (someone tell me if these parts will fit well in one of these cases)
My Drive Replacement is the wasp from Badassconsoles.com with Mega Drive V5 (check them out it will be worth your time)
Im going to use the Microcon controller and its board (no customs on it , all OEM)
Im using a DOL-CPU-50 from badassconsoles again
A PSX screen or a 4 inch car monitor maybe led modded
NiMH battery (If i learn some more things about Li-ion maybe i use it)

Also its not a commission unless you can buy me a new PC

The Price is (Parts and Tools combined w/ shipping)
187.93 (with ZN-45)
187.16 (with ZN-40)

Parts should come in December or January
Project should be done in 2-4 months or weeks

UPDATE (11/12/2014)
sime13 said i make somthing like his midnight cube so the case is going to be a gamecube monitor with 7 inch tft screen
I'll update later on the price (Thanks sime)

 

[vince]

if you go with a Zn-40, you'll probably have to cut the heatsink and motherboard
be very careful with battery choice. there's a lot you can find here about batteries
just do some research. you should look at all the mega-stickies

 

[KidBuilder1]

if you go with a Zn-40, you'll probably have to cut the heatsink and motherboard
be very careful with battery choice. there's a lot you can find here about batteries
just do some research. you should look at all the mega-stickies

Thanks I was about to say i was going the original power supply

 

[Stormower]

Good Luck guy !
I just think it's very expansive, I a buying a GameCube transportable (without battery) for 65€ (+19 for the consol)