GCP Worklog

[GamecubePerson111]

Ok, this is going to be my worklog for my GCp ill try and update it as best as i can as I'm busy with a lot of other things. Ive already started and am already half way done about. Ill start posting pics of my progress tomorrow. I'm going to try and fit everything in a ZN-45 case. Im just wondering if somebody can help me with how i can switch between an internal and external controller on the gamecube. Thanks

 

[Basement_Modder]

Good luck with fitting batteries in.

Slimming a gamecube for a ZN-45 is easy enough. Fitting batteries is a Sega.

 

[GamecubePerson111]

Ya Im using 4 3.7v lipo cells, so hopefully they'll all fit

 

[jelte1234]

Ok, this is going to be my worklog for my GCp ill try and update it as best as i can as I'm busy with a lot of other things. Ive already started and am already half way done about. Ill start posting pics of my progress tomorrow. I'm going to try and fit everything in a ZN-45 case. Im just wondering if somebody can help me with how i can switch between an internal and external controller on the gamecube. Thanks

I guess that having a switch in the ground should work.. I plan on doing that too, (with the original controller board connection behind a slot)

 

[GamecubePerson111]

Ok, just a switch on the ground?, Thanks

 

[Basement_Modder]

Don't post flax if you don't know flax.

You have to switch the data lines, not GND. Putting a switch on GND was terrible advice.

 

[GamecubePerson111]

Oh would that ruin it? Good thing I didn't try yet

 

[Mako321]

Wouldn't ruin it, but it wouldn't work while you tried it.

 

[GamecubePerson111]

Ok sorry everyone but I won't be able to put stuff up on here for a couple days.