Re: It's time to bring it to the next level!!! CubeStationFu
Thanks man! Means allot coming from the gamecube revolutionary guru
It is indeed a tight fit. As you can see the wires of the wiikey have been placed a certain way so that the components sticking out of the screen board could fit closer the the gc mobo but seeing my screen died I have to see if my new screen will fit otherwise I have to rewire some things.
What screen do you use? I'm still thinking of getting a quality screen instead of a cheap one. The image quality has to be as good as possible.
The tempratures are acceptable and won't go any higher than 55 degrees celcius (meassured at the back of the mobo). I have a fan sucking air in and blowing it through the heatsink and another fan sucking air out of the portable and blowing it out of the case. That way the heat get's out quicker. Also I have both fan's running at 5v.
Only thing I don't like about something this small is that you can't mount everything nicely. I had to epoxy allot of stuff on the board to keep it as thin as possible.
You fusion micro rev 2 is looking sick also. Can't wit to see it done. This project however is my own and doesn't have any priority so it could take awhile before it's done.
I already have plans for an even smaller one which uses 2 micro sd slots and a trimmed down wiikey. But yeah all these plans and non are done so I'll just shut up now and crawl into my cave......
EDIT: Ashen I actually see you are using the same screen as I was for you rev.2 I must tell you though that your other screen was better as it filled the whole screen. This screen doesn't fill the entire screen which is kind a bummer if you ask me. Unless yours is different. Try a couple of games and see what I mean.
true true anything can be done. We'll see who takes on that road but in the mean time this will have to do 
