Gamecube might be fried. Help?

midgetman104

Active Member
Hello everyone, I went to go turn on my gamecube when I saw that the 1.9v line had popped off so I reconnected it and turned it on. But I accidentally reconnected it to the wrong place (black arrow). and now it won't get hot, any chance of reviving it?
4urAuvN.jpg
 
That black spot is ground. Did you have ground connected correctly? If you did, then 1.9v and ground were bridged, and I would expect that your regulator is broken, if anything. If you have a multimeter, check each wire with voltages to see if the right voltages are being produced.

If the voltages are right and you have the wires connected right, then your motherboard has unfortunately been fried. There's nothing you can really do about that.
 
Back
Top