Gameboy color; needs some fixing

[Argelfraster]

I recently bought a gameboy color and was saddened that it didn't work.
I opened it up and found this:

It seems the EXT port was broken off aswell as a piece of the circuit.
I do not want the EXT port anyways as I am putting a switch there, but for the system to work, I need to do some wiring.
I have no clue about what wire goes where.
Is there anyone who can help me?

 

[PalmerTech]

It should work without that part of the board. If it still has issues, they are elsewhere.

Take a file and make all the edges smooth, and make sure there are no shorts. Then, check the fuses F1 and F2 down at the bottom of the board, they are prolly blown.

 

[Argelfraster]

If the fuses are blown then i have to replace them?

 

[PalmerTech]

Nah, just bridge them.

 

[Nintendott]

Hey i have a nonworking GB original, is there any fuse on it ?

 

[Argelfraster]

Bridging the fuses didnt work