Blargaman91
Well-Known Member
I'd like to start a dedicated, reliable electronics modding service for anyone who needs a little help getting a project done.
My offer would include these things:
1. Wiring for most anything
I will do as much wiring as you need on surfaces ranging from large to very small - it could be a circuit board, an FFC, or something else.
Most wiring will not take long at all.
0.5mm pitch FFC wiring:
Plain memory card wiring:
2. Clean motherboard trimming for GameCube only
I can easily perform any practical cut you need on your GC. This includes all of the cuts classified by Ashen (Minimal through OMGWTF)
A hybrid motherboard cut:
3. Other small, hand-built circuits
Circuits that have simple arrangements to perform simple functions. This may be something like a low battery indicator or a custom built regulator.
A small phone charger, for example:
Please PM me for more details if you're interested or you have any questions. Thanks!
My offer would include these things:
1. Wiring for most anything
I will do as much wiring as you need on surfaces ranging from large to very small - it could be a circuit board, an FFC, or something else.
Most wiring will not take long at all.
0.5mm pitch FFC wiring:
Plain memory card wiring:
2. Clean motherboard trimming for GameCube only
I can easily perform any practical cut you need on your GC. This includes all of the cuts classified by Ashen (Minimal through OMGWTF)
A hybrid motherboard cut:
3. Other small, hand-built circuits
Circuits that have simple arrangements to perform simple functions. This may be something like a low battery indicator or a custom built regulator.
A small phone charger, for example:
Please PM me for more details if you're interested or you have any questions. Thanks!
