Recent content by vince

Wow, this looks legit. Nice work.

Are you getting normal audio along with the static or just static? If all you're getting is static, you could have a damaged preamp or it's just not getting a high enough voltage. I would also try another pair of speakers to see if they are causing the issue.

It looks like you have the resistor on the wrong side of the LED. Wiring the LED incorrectly can kill it so maybe replace it if rewiring doesn't work. There's a picture in Kasar's guide.

take off the cap and try again? Try the c-stick on a second controller if you have one? If you still get the issue, it could be broken. I wouldn't know how to fix it.

it is said here that there is such a motherboard but there's no picture: http://www.bacman.co.uk/home/gamecube-voltages/ not sure if he means on the motherboard or on the regulator though The generic 3rd party controllers have bad analog sticks but if you're going to replace them then i guess...

Cool portable. looks nice I would try this myself but the cartridge slot relocation is scaring me away

does anyone have one of these http://www.pchub.com/uph/laptop/88-7628-428/IBM-Thinkpad-380Z-2635-HGA-Cooling-Fan-.html for cheaper? preferably $15-$20?

if you go with a Zn-40, you'll probably have to cut the heatsink and motherboard be very careful with battery choice. there's a lot you can find here about batteries just do some research. you should look at all the mega-stickies

sd gecko loads roms that are compatible with the emulator you are using, no gc isos it all goes on the sd card you are using for the sdgecko i think you mean wasp fusion and if you use it, there isn't a need for the disk drive really

you can get one on amazon for $30 or you can make your own: http://www.gc-forever.com/wiki/index.php?title=SDGecko if you want to use an sd slot, there are some on ebay. just search "sd card module" all you need is the sd slot on the board. the rest is not needed

good luck sounds like it's going to be almost a GameCube sized gamecube portable :awesome: you should think about sd gecko for emulators also i think you need a megadrive v4 for both wiki and disk drive. not really meant for portables though i don't think

dremel + patience = :D that's how my portable came out so clean :lol:

thanks, i adjusted the lighting to make it look more epic also to distract from all the scratches.

Hello everyone, I'm new here but I've been around researching for my portable gamecube project which i have just finished. It's not the best but I works for me. (also posted on gc-forever) specs: 3.5in ebay screen official gamecube controller, slightly cut, no rumble rev a/b motherboard...