Recent content by Tesslayer

  1. T

    majoras cart dead?

    AFAIK, Majora's Mask doesn't use a battery for keeping saves, so it's probably not the cartridge itself
  2. T

    Psone Audio Amp Relocation

    Hey guys. I got my hands on a psone screen for another portable, and had a question about the audio amp. I know you can completely cut the audio amp off the board if you use a seperate amp, but i would like to know how to to reuse the original amp My planned trim is this: (pic is blurry but...
  3. T

    Tesslayer's First working GCp

    Finally finished my first working GCp. I had made another but it died after about a day of use. Anyway, Pics! Uses Wiikey Fusion w/ Swiss autoboot, 2043 internal memory card, SD Gecko, PSOne screen, 2.5 hour battery life Case made from a Baby Wipe Warmer (???) Sorry, the pics were taken with...
  4. T

    Problem running some games - Sleeping N64?

    Nevermind, I solved the problem. The wires running to power the screen weren't thick enough, so I swapped them out with some thicker wire
  5. T

    Problem running some games - Sleeping N64?

    I'm in the process of building a n64p (VERY original), and I'm now at the phase where everything is hooked up to the batteries. I am using 2 of these batteries: http://www.batteryspace.com/polymerli-ioncell37v5000mah896474-2c185wh10arateullisted.aspx along with this protection board...
  6. T

    LapCube: My first portable ever!

    Well it took long enough to make, here is my first portable: The LapCube Psone Screen 14.8v 5 Ah battery pack 4 controller ports 2 memory card ports Pictures: Sorry I never updated my worklog, school and other things kept me busy
  7. T

    New Gamecube Portable Worklog

    Here's the new motherboard with ports removed Top Bottom
  8. T

    New Gamecube Portable Worklog

    Progress: I think I broke my motherboard. hailrazer is selling rev c cubes, I'll probably buy one from him. Got my regulator from TI Decided on case: It will be a wooden, laptop style case with controller and memory card ports on the front Still need to do: Buy batteries (have them picked...
  9. T

    New Gamecube Portable Worklog

    How should I get 7v to power the psone screen?
  10. T

    New Gamecube Portable Worklog

    Can I just bridge the 5v and 12v inputs on the motherboard with some solder?
  11. T

    New Gamecube Portable Worklog

    I suppose now is as good a time as ever to enter the portablizer's club, and what better way than to portablize my first and one of my favorite game systems: The Gamecube! Features: Rev. A GCN mobo- original regulator 14.8v 6.4Ah lipo battery pack PsOne Screen Original Disc Drive Memory Card...
Back
Top