Recent content by Schnuppy24

Re: Schnuppy24's n64p worklog i know but my batteries are rated at 7200mAh so I'm pretty confident that will still give me plenty of playing time. true but i couldn't find another step up regulator that could put out enough current to run my screen.

Re: Schnuppy24's n64p worklog I have my battery of 7.4V going into two 7805's, then the 5V leaving the two 7805's go into a ptn04050 voltage regulator set to output 10V. The reason why i use two 7805's is to ensure that my screen gets enough amperage. My only gripe about using this method is...

Re: Schnuppy24's n64p worklog Thanks man im very pleased with how the case is coming along too! i should be done painting it this week. Sanding and painting to get all the imperfections out takes a while. The screen i used is this http://www.aliexpress.com/item/New-5-6- ... 40797.html...

Re: Schnuppy24's n64p worklog thanks for the positive feedback! :D and thecaseperrojas is correct about the start button

Re: Schnuppy24's n64p worklog The 3.3V step down regulator is wired up and working (the cap and resistor are underneath it) the thickness is just over 2 inches now. Once the batts come ill be able lay everything in the case to see how much extra room i have to play with. Ill probably make...

decided to transfer my worklog over to here as well. havent posted here in a while and thought i should! anyway i decided to make a n64p with an everdrive64 for my next project. here the button layout that i will most likely go with i was surprised at how small the everdrive 64 is...

Hey guys I'm having some sound issues. First off when the headphone jack is in use the sound has some static. Heres what i wired. 1 - Not sure where to ground this line 2 - + left output from audio amp to headphone jack 3 - + right output from audio amp to headphone jack 4 - to speaker left...

SO SHINY!!! MUST TOUCH!! :shock:

Well im starting to see the light at the end of the tunnel with this project! Hopefully this will be done next weekend, thats if i get my wiikey fcc cable in the mail. yea i kno im a wuss who uses a break out board for the wiikey fusion the front is practically completed. All i have to do...

Thanks for the positive feedback guys! :lol: I am using the same screen Ashen uses in most of his portables. The screen is a bit expensive but the quality is excellent and it is very small. Heres the link: http://www.aliexpress.com/store/600281/ ... l-lcd.html

Thanks for the save Ashen! and i finally decided to branch out and check out other forums. :D

Yes I did give credit to ashen on another forum, and he said he didn't mind me copying him at all. (I prolly should have done it here too so people don't get the wrong idea)

Features: - 5'' Digital Hot Sale TFT LCD Module - built in memory card - 7.4V batteries (7800mAh) using Zenloc's custom regulators. - iLUV audio amp - headphone jack - wiikey fusion - ability to run off of wall power - vacuum formed case - low battery indicator (red led comes on with about 15...