Recent content by Bum

First have to say, Nice Portable so far! The Errors and Light you are getting are because of a wiring problem. I was getting the same problem literally 2 days ago. I redid my wiring and sure enough it was fine. Go through and check continuity on each of the wires. If that yealds no faults, i...

Welp... I can seem to get it to work. I tried realigning that thing at least 10 times all with the same result. Do you guys have any other ideas? If it helps I could take a video of what happens.

Sounds good, I'll try it tomorrow.

Yeah, I actually had a flux spill :P Went through and tested for continuity and shorts. Seems fine

Ok, here is a few pictures of my wiring. I have redone them. Twice. Both resulting in the same occurrence.

Exactly what Fluxido said. If you want to do an LED Mod, I believe Zenloc has a guide loating around that will allow you to get the board to fit all behind the screen. I can see if I can find a link...

First Off I got My Wiikey Working, It Boots, Etc... but... When I attempt to play a game or even if I wait too long at a menu the cube will flip out and freeze. I don't know if it has to be with the thermal protection circuit not connected or something of the...

Yep, Sorry forgot to mention that.

Hi Guys, I am having trouble with my Wiikey... Obviously. I went through and wired my Wiikey up to my GameCube Via the NewHaven Breakout board and I am 95% certain it is wired correctly. I went pin by pin twice to check continuity and they were all fine. Now the actual problem. When I boot...

ANNNNNNDDDDDD Problems! So, The Wiikey WILL boot but I have to hold the pin 29 switch for it to boot, and then once at the Wiikey Menu, it does nothing. Nothing responds. I tried shortening the ground wires to see if that would alleviate the issues. Nope. I don't want to rewire all the pins...

Well Hi Guys! After a bit of time, one broken Wiikey, and plenty of Time trying to open a Wii without a Tri Wing Screwdriver (P.S.... Not Fun...), I have returned to finish my portable! :D That being said, I have... -Updated my Wiikey to 1.5 (At some point I will setup Autoboot. No SD Gecko...

Or... You could just get a Gamecube and a Gameboy Player. Its basically what you are looking for. For even more Gameboy authenticity, you could do some searching and get a few Gameboy advance to Gamecube cables and use some Gameboy Advances as controllers. Here is a photo for reference. I...

Well you could make it wireless with a wireless video transmitter and receiver. If you hooked all the consoles to a video switcher and had the output feed into the transmitter, you could have a wireless video feed like the Wii u. The only problem I could see is the controller. If you made some...

You mean this hammer tech?

It looks just... I cant even form the words at this point. Excellent Work! :D