I'm not making a log of my first one, because it's almost done and it would be done if my paint wasn't being .
The Fierce64 is going to be as small as I can make it. I'm not necessarily going for worlds smallest, but I want a really small portable for myself, and
making one smaller than the TSF actually isn't that hard.
So, if it's worlds smallest, cool. Although I am using SO many things that other people discovered, or are other peoples ideas.
Dpad and L
3.5" eBay screen
(Hopefully) stereo audio.
Rough dawing of the front with measurements(My mobo will just fit if I RCP). The dashed line is for if I cut the side and wire the CPU to the RCP. The measurements are not counting the thickness of the plastic.
I'm going to use a Dpad as C buttons and a multi directional tact as a Dpad. Quick question- How do you make a multi directional tact look good? I saw Mario had a cover for one I think in his 364.
Also using a PSP analogue stick(thanks to Mario for the pinout)
My mostly trimmed mobo(boring)
The wires from the CPU to the RCP are for if I cut the board on that side, and I still have like 8 more traces to rewire.
I may or may not cut all the way up to the pins on the U8
Nothing is definite, just ideas and planning.