Hey I'm making my first Portable and I have a major problem the board. I started working inside the GC a few days ago, and all I have done so far is remove all the serial ports and relocate the regulator board and connect it using 5V. When I tested the console, the sound was all fuzzy. I tried a few different analog and digital speakers, but it was always fuzzy. None of the wires connecting the regulator board touched, although two were close, and eventually, when I least suspected, the regulator board died
I know that on [url]/viewtopic.php?f=36&t=1654[/url] It says how to replace/bypass the fuse on the regulator board, but I don't want to try without figuring out why my reg. board died.
Any advice? I tested the reg. board w/ a multimeter to make sure that it was not working.
I have a 14.4V 3300mah NiMh battery, but at the time I was running it off of wall power from the original power supply.