I'm entering the race: SonyQrios µGC Worklog

SonyQrio · **Posted:** Mon Jan 23, 2012 6:42 pm

Ashen wrote:

Of course it did, you're welcome.

Don't worry SS. You are still awesome too.

SonyQrio · **Posted:** Mon Jan 23, 2012 8:43 pm

MOTHERBOARD PROGRESS METER: 70 %

Board Cut: √ 20%
Board Heat-Sink'd and Fan'd: √ 20%
Custom Regs: 1/2 (3.3v on its way. 1.9v wired and working) 20%
Audio Amp: tested and working. √ 10%
Wiikey: X (tomorrow... :palmer:

) 30%

So yeah!

SonyQrio · **Posted:** Mon Jan 23, 2012 8:44 pm

SonyQrio wrote:

But, WHICH COLOR SHOULD I GET! THEY ALL LOOK AWESOME! :gonk:

http://www.ebay.com/sch/i.html?_from=R4 ... OFF+-WHITE

nuke · **Posted:** Mon Jan 23, 2012 10:00 pm

SonyQrio wrote:

MOTHERBOARD PROGRESS METER: 70 %
Custom Regs: 1/2 (3.3v on its way. 1.9v wired and working) 20%
So yeah!

SonyQrio wrote:

MOTHERBOARD PROGRESS METER: 70 %
Custom Regs: 1/2 (3.3v on its way. 1.9v wired and working) 20%
So yeah!

SonyQrio wrote:

MOTHERBOARD PROGRESS METER: 70 %
Custom Regs: 1/2 (3.3v on its way. 1.9v wired and working) 20%
So yeah!

Finally?

SonyQrio · **Posted:** Mon Jan 23, 2012 10:03 pm

nukear wrote:

Finally?

YEAH, FINALLY.

SonyQrio · **Posted:** Wed Jan 25, 2012 3:08 pm

Does wire length matter on a Wiikey? All of my wires have varying lengths. It shouldn't matter, right?

SonyQrio · **Posted:** Wed Jan 25, 2012 5:43 pm

I have an IPL 1.0 board.

Can I use the MX Chips from an NTSC DOL 001 CPU-30 board on my DOL-CPU(P)-01 board?

Ashen · **Posted:** Wed Jan 25, 2012 7:32 pm

IPL 1.0 PAL boards are fine.

SonyQrio · **Posted:** Wed Jan 25, 2012 7:55 pm

What could be the problem then?

Ashen · **Posted:** Wed Jan 25, 2012 9:27 pm

Are the region switches on the wiikey set to PAL?

[Worklog] I'm entering the race: SonyQrios µGC Worklog

Who is online