Additional Detail here:
viewtopic.php?f=64&t=9257

How would I check to see if a fuse is broken or not? My ps2 randomly died and I am leaning towards the fact that some of the fuses blew up. Also, could I just bridge the connection of one of the fuses once I have detected one?

THANKS

_________________
________________________

"I have not failed. I've just found 10,000 ways that won't work." - Thomas Edison

_________________

Using ohms I presume, but what would a broken fuse return. 0 , 1, some random number?

_________________
________________________

"I have not failed. I've just found 10,000 ways that won't work." - Thomas Edison

Set it to continuity ("beep") mode. No continuity, no beep.

_________________

After testing I found two problems:

here
http://imageshack.us/photo/my-images/83 ... 51222.jpg/
and here: http://imageshack.us/photo/my-images/85 ... 51132.jpg/
( notice - high res photos )

The first one blanked out completely, while the second one was iffy(probably how I was holding it)
I plan to order from digikey, so I could get an extra, but in the meantime can I just bridge the connections?

Also, do you have any idea what the fuses specs are? The writing on the PCB isn't very descriptive ( just says PS 1 , 2, 3 nearby the fuse)

THANKS

_________________
________________________

"I have not failed. I've just found 10,000 ways that won't work." - Thomas Edison

I wouldn't bridge the connectors. If the fuse blew, it's an indicator that something's wrong, and it was to save the circuitry. Bypassing the fuse could be like taking down a wall and end up gingivitus-inviting up your PS2.

You could do it, but I wouldn't recommend it. It defeats the fuses' purpose.

_________________

Ok. Ill have a look at one of my other dead ps2s, see if there's a similar fuse on it to transfer over. How can I check if it is the exact same spec?

_________________
________________________

"I have not failed. I've just found 10,000 ways that won't work." - Thomas Edison

How does a mini fuse look like exactly ( I know how the bigger ones look - circular tubes ) ? The text on the mobo is too general for me to derive any useful information. The scans on the web of the ps2 fuses are low def.

_________________
________________________

"I have not failed. I've just found 10,000 ways that won't work." - Thomas Edison

They are usually just small black squares with solder on both ends. The fuses on most boards are marked with an f. Like f1 , f2 etc.

_________________
My portable Systems:

-----Genimini---------Darth64----------Dreamtrooper---------Ncube----------Kamikazi64-------N64Boy Advance