The World's Smallest N64p Worklog!

βeta · **Posted:** Sun Aug 14, 2011 1:23 pm

Glad you're getting use of it. Anything else you would like to have drawn up?

mymixed · **Posted:** Sun Aug 14, 2011 1:41 pm

Thanks for the offer! Maybe we should have a barbeque cut for N64's less than rev 8. That would be helpful... What It looks like on this board is that the capacitors are in the same place on revs 3-7, so maybe we need a cut for that

. Thanks for your art beta!

- mymixed

bud · **Posted:** Sun Aug 14, 2011 2:05 pm

I've been thinking of ways to cut rev5 and below boards as small as the higher ones. I think it's doable.

mymixed · **Posted:** Sun Aug 14, 2011 2:16 pm

It's probably just a little bit harder. Also, has anyone ever pulled video from c15 and gotten black & white? I've gotten it on two of my boards. I know your supposed to pull it from c16, so I'm wondering if c15 is needed. Also, 2 more connections until I'm 1/2 done.

- mymixed

bud · **Posted:** Sun Aug 14, 2011 2:17 pm

That's the chroma or luma line. Not sure which. But no, it isn't needed.

mymixed · **Posted:** Sun Aug 14, 2011 2:30 pm

Awesome, one day I'll find out what two caps are needed

.

EDIT: So on your diagram beta, can I pull L and R audio from those pins or do I put L and R audio into them?

- mymixed

bud · **Posted:** Sun Aug 14, 2011 3:52 pm

I believe you connect them back to the outputs. I think I remember ßeta saying that you didn't have to though.

mymixed · **Posted:** Sun Aug 14, 2011 5:02 pm

So I RCP'd! It all looks good, however it doesn't work :|. Pics:

So, any suggestions for troubleshooting?

- mymixed

bud · **Posted:** Sun Aug 14, 2011 5:10 pm

It's very important to have all of the wires going to the chips as short as possible.

brunoip · **Posted:** Sun Aug 14, 2011 5:13 pm

is the jumper connected in the opposite way?

The World's Smallest N64p Worklog!

Who is online