The Battop 360

ttsgeb · **Posted:** Wed Jun 27, 2012 1:36 pm

Aluminum is also non-ferrous. If you have a heatsink that magnets stick to, you have a flax heatsink.

Batman · **Posted:** Wed Jun 27, 2012 1:45 pm

Option 2: I personally vote for this, but will it work? This was the original heatsink I got
http://imgur.com/h88aA
But it ended up being too wide, but then I thought and I came up with this idea. Get the heatsink off the other supersmall heatsink/fan and mount that under the bigger one. I came up with this
http://imgur.com/UmbTe
Do you think it will work?

Batman · **Posted:** Wed Jun 27, 2012 1:48 pm

Picture for idea 2 (see above)
http://imgur.com/OiuVT

thecasperrojas · **Joined:** Sat Mar 24, 2012 1:30 pm **Posts:** 436

Batman wrote:

Picture for idea 2 (see above)
http://imgur.com/OiuVT

well i highly doubt it will work but give it a try just turn on the system and check the heat if both are almost the same heat it works, if the top one is cooler , quickly turn off the system and get a batter heat sink

Batman · **Posted:** Sat Aug 25, 2012 5:57 pm

I have been thinking, instead of that idea, what if I used a REAL copper piece that went under it? Like a copper shim for computers.

thecasperrojas · **Joined:** Sat Mar 24, 2012 1:30 pm **Posts:** 436

Batman wrote:

I have been thinking, instead of that idea, what if I used a REAL copper piece that went under it? Like a copper shim for computers.

thats will work am 95% sure , can you give a picture idea so i can see and also let me know what size is the area around the heat sinks landing

thecasperrojas · **Joined:** Sat Mar 24, 2012 1:30 pm **Posts:** 436

still down to seen this baby finish

Batman · **Posted:** Sun Apr 07, 2013 3:37 pm

thecasperrojas wrote:

still down to seen this baby finish

It will be eventually, I am just finding it hard to work on. Still haven't found a solution about the heat-sink.

[Worklog] The Battop 360

Who is online