Xeno V2.0?

master801 · **Joined:** Fri Aug 12, 2011 10:17 pm **Posts:** 57

Can we make our own Xeno V2.0 Chips for the gamecube?

Ashen · **Posted:** Thu Nov 24, 2011 8:37 pm

http://www.gc-forever.com/forums/viewto ... f=15&t=439

Lots of other useful info there about the Xeno and programming your own chips.

Noah · **Posted:** Thu Nov 24, 2011 8:44 pm

Short answer no.
Long answer: I'm sure it's possible, but you would need to find the specific chip size and get the files, then write them to an empty chip using a universal programmer. The $15 is worth it, and much easier than programming and making your own mod chip. I'm a very cheap person, but I threw out the $15 or whatever it was. If you don't have $15, you shouldn't be in the hobby. It's expensive.

megalomaniac · **Joined:** Mon Nov 21, 2011 7:56 pm **Posts:** 123

short answer: YES

Long Answer: minimum 3 parts are required, 7 parts total if you want to add LEDs.
no programmer required either, use the GC to flash the chip (alternate DOL loading method required)

follow the link posted by Ashen for more info

master801 · **Joined:** Fri Aug 12, 2011 10:17 pm **Posts:** 57

Have you ever had that time where your brain overloads and you cant take much more? Yeah I'm having one of those times, so can you show me how to do it the dumb way?

megalomaniac · **Joined:** Mon Nov 21, 2011 7:56 pm **Posts:** 123

this pic shows the dumb way...
for more info, google XenoGC Clone
i wrote a huge wiki with lots of detail..

Xeno V2.0?

Who is online