Awesome! I'll go look.

- mymixed

_________________

Ok, here's a weird problem. My N64 audio works fine connected to a tv, but when I connect my Lm386 to it, I get oscillations. When I turn the pot, it will oscillate at different frequencies. I have tried multiple LM386's and multiple circuits but they all do the same thing. I'm thinking its a problem with the LM386N-1... Anyone ever have this problem?

- mymixed

_________________

You better finish this, so many people have promised a world's smallest portable, but never seemed to finish them.

_________________

I'll finish it . Anyway, so I'm attempting RCP right now, however I can find my 30 gauge kynar wire, so I decided to use IDE. When I did, I bridged some connections. Then I went to rat shack and bought some solder wick. With my Harbor Freight soldering iron (The tip is dead so it works as a chisel tip), I wicked it right off, and it works! However, it is very hard to solder the IDE to the pins, any tips? BTW for the soldering, I'm using a sparkfun soldering iron.

- mymixed

_________________

Ok, I started RCP'n. I got three connections working, but on my fourth connection I peeled the third trace. I think it was because I was using my harbor freight soldering iron with the solder wick. Anyway, I soldered to the chip on the third pin (pin 16 from the right to the left), and it works!


Flux is good and bad... Anyway, I'm going swimming, then I'll come back and solder some more!

- mymixed

_________________

Now go finish the rest. I want more progress.

_________________

green electrolytics? where?

_________________
     Argentina

Oh wow oops . Green ceramics . That color green electrolytics would be cool though.

- mymixed

_________________

lol, I have a few, light green and dark green

_________________
     Argentina

Epic... I need some RCP wire help. Anyone used IDE wire to RCP?

- mymixed

_________________