Search results

Re: SS's PGC Worklog Dang I HAD THAT DREMEL MULTI MAX BUT THEN I SOLD IT TO BUY A RTX-B i is a sad boy

yes its a gamecube and with ONLY power connected in (no signals from gamecube) screen is white. should it be black?

yeah i tried again with the ground pin connected to a ground spot on the screen board and it worked

Re: SS's guide to wiring a 3DS joystick to your GC controlle the diagram seems to be a c stick pcb. will this method work for both the c stick and the joystick?

when i turn on my screen with the analog input and the regulator and everything hooked up, i get a negative video like the main background is white and the purple cube is green

alright so i wired my screen up to the 7808 and the 7808 to the wire going from power switch to the mother board with the ground pin of the regulator which had a wire going to the positive end of the power adapter. when i turned it on, the screen got power for a second as it did turn on but then...

oh mighty shockslayer. please make a diagram.

Re: Fusion Micro ~ Worklog thanks and is the psp nub a good resistor level for when not being pushed a.k.a when its idle the game detects it as idle

Re: Fusion Micro ~ Worklog could you tell me how to convert 6 pin to 4 pin for that analog stick

Re: Fusion Micro ~ Worklog http://forums.modretro.com/viewtopic.php?f=36&t=8203 could this help ^^

http://www.sparkfun.com/products/9426 i found this ^^ on sparkfun (which has a ton of awesome crap) it has four pinouts though. i would like to know what the pinouts of the original left analog stick are (cause that has 6 pins) and the c stick (which also has 6 pins BUT the cable going from the...

wait 11.1v i cant use the regulator that's on the rev c GameCube?!? would a 14.8v still work? if none of those work, what about 14.8v battery going to 7812 regulator going to gamecube

i would still need 11.1v going into the system?

could i use a 7.4v battery going into psone screen and from the battery a 7805 regulator having 5v go into the gamecube?

i intend on a rev c uncut with a zn45 with no battery but later ill churn out moneys for a battery pack in a ag85 that will magnetize to the back of the zn45. small when not portable and chunky when on the go a zn45 would fit a rev c uncut mobo.(i might cut the gold parts though)

ok some questions about adding the wii key to my gamecube portable on a rev c board where would the 3.43v come from? and if i want just wiikey fusion i would buy wiikey fusion, the adapter board, solder those points to the gamceube dvd drive port, put in a sd card and wa-bam it would work? if i...

i decided to recycle a ton of things from the game cube it self before throwing it away. i already have the controller soldered and i used the original power led and resistor. the reset switch is actually a small lever with screw holes so i soldered it on as a z button. aesthetically, i'm using...

i seriously need help with battery. i want a 12v but 11.1 or 14.8 is good too. prefered to be flat and long than a brick. must charge and use at same time

what you could do for quick conversion is make a gamecube controller which plugs into slot 1 and has left analog stick and dpad on left side of screen and start abxyz and c stick on other it would add to the length but can be removed. a seperate accessory, if you will :tophat: you can make it...

ok final decision on screen is psone screen and ill probably do led mod so i can use less power and trim just the top of the board. ill frankencase together a zn45 and a jb55 (sound familiar?) battery is still up for decision cause the cheap chinese ones are sketchy but the nice ones are...