Recent content by sl33pydog

yah you just have to solder and program it yourself. Not too easy for me. If you're on the fence I would wait for the badass board.

Oshpark

I'll be populating a new board but hand solder all the points. 1st one I tried drag solder, and the second I tried solder paste and a heat gun.

Unfortunately not.

I had 1. But that was to the BCLK and ADATA.

refer here for pictures: http://bitbuilt.net/forums/index.php?threads/need-help-with-gc-video-0-9.291/

So I tried making a gc video the other day and managed to make two. I have a HW-USBN-2B to program and very little knowledge to program with. After getting everything soldered and connected to all of the pins on the motherboard I flashed the firmware with the .jed file. It said it was...

Anyone have a prebuilt, working and flashed GC video lite .9 they are willing to sell? Looking for the gcvideo for component connection for a portable that I've been making.

I'll take a $30 combo with the asus fan for a rev a-b maximum safe cut. Like the one in your picture.

PM sent

If anyone has an extra V6 laying around wanting to sell it I'll buy it for $35-40 (without shipping conUS). It's the last component I need to make a portable besides the shuriken v2s I have to make.

Thanks Mooper. That was exactly what I did. Im using a 2 cell configuration and set the pins to vref/floating. I switched jp5 to open and now I get ~2a. Thanks for the guidance :)

Tried a bunch of different batteries. Same thing. No sure what I'm doing wrong. Mooper what is your Vin and Vbattery?

I would say it was more than half full (3/5 on the battery meter) judging by the charge voltage and the battery meter. I thought it was thermal related since I'm testing another eval board that has that feature but it remained the same after some fan cooling. I'll try a battery that's drained...

So R30 (232k) and R32 (32.4k) are the voltage divider resistors. That should already set current to 2Amax. I still see .25amps. I can't really tell but do I need to set jp3 to high to enable the voltage divider? I currently have it open.