Recent content by Quickstart3700

Hello everyone, I was looking at the zenloc custom regulator page and saw that it is possible to power the CPU and GPU separately in order to make the power draw more efficient. However, where would I attach the 1.5v and 1.7v for the CPU and GPU respectively. I would also like to know where the...

Ok. Im pretty sure i found out the problem. The ffc cable i was using is not the one I originally got with the wasp. I lost that one so I bought a new one from digikey. Turns out, the one I bought from digikey is reversed so pin 1 was connected to where pin 32 should be and so on so forth. I'm...

Turns out the problem isn't with my wasp or sd because it works with my Wii. I tried rewiring my GameCube to the megadrive but I still get the same error. I double checked my wiring and sd format. Even though I have a dol cpu 30 is it possible for there to be a compatibility issue?

Im pretty sure the problem is with the sd card slot. Do any of you guys know where I could purchase a new one? I dont want to drop 25 $ on a new wasp fusion.

I don't have a wiikey fcc so no i couldnt have mixed them up. The sd is formatted to fat32 so I guess ill try it on a wii to see if its my gamecube wiring.

I installed a megadrive v5 onto my DOL CPU 30 gc and plugged in the wasp which came from badassconsoles so it has swiss on it. When I turn it on, both the red and blue leds light up and after a few seconds the blue light shuts off. It looks like this http://imgur.com/8a6G8wD and then turns to...

Okay, thank you. My wii is softmodded but it is pretty messed up in there.

Hello. Last year I ordered my wasp fusion from badassconsoles in order to create a GameCube portable. I decided to restart this project by testing the wasp fusion on my Wii. When clicking start on the disk menu, this popped up on the screen http://m.imgur.com/qRS6EPO The wasp fusion should be...

I just got this new motherboard today and tried it with the ac adaptor and everything seems to be working. However, after I strip the ports of the motherboard it doesn't seem to function anymore. The CPU and GPU power on as those chips heat up, but the power led doesn't work and neither does the...

Well, not giving up on this project yet. Haven't worked on it for the past few months cause I just grew kinda bored and school/track/league haven't been helping. I decided to ditch the ps1 screen and save that for something else. I also ditched batteries cause they suck but I made sure to keep...

Thanks again for responding. The cells are pretty old, so my battery life prospects aren't looking very well. However, the only reason I have the batteries in is so that I can show it off that it can run without plugging it in. At least, for now I'm going with this. If I can find other batteries...

I was planning on using this http://www.ebay.com/itm/1-PCM-Protection-Circuit-Module-For-14-8V-4S-Li-ion-Li-Polymer-Battery-pack-SM-/220967030647?pt=LH_DefaultDomain_0&hash=item3372a94f77 as my 14.8v protection circuit for my gamecube portable. The problem is I have 8 3.7v 1200mah lithium ion...

Just got the resistors, capacitors, and leds from digikey so I can finally led mod the ps1 screen and assemble my voltage regulator. I can't post pics right now but I found the pins on the battery circuit to short and tested it with the gamecube motherboard. It works, but to be on the safe side...

Alright, got my batteries. I extracted them from an old laptop battery, tested them with a multimeter and they're all good to go! They even have an led fuel gauge :) I also got my regulators from ti, but I can't use them yet cause i'm still waiting on my resistors and capacitors from digikey...

I decided not to include a speaker cause I didn't feel like it. The'res a headphone jack though, so that fixes the sound problem. And yeah, I didn't think I was gonna use this in school when I made it but obviously I was wrong :wink: