Recent content by Keirstin Bloom

  1. Keirstin Bloom

    Custom GBA buttons?

    I just want to clarify again since you mentioned thinner that I was talking about Testors spray paint, not the bottles of airbrush paint (That's generally what the thinner is for). And as for clear coat, I use clear testors one coat lacquer. (Again it's spray paint)
  2. Keirstin Bloom

    Custom GBA buttons?

    Nope, you can use whatever paint you want, but since using the buttons wears the laying down, I recommend Testors or Tamiya since they're very sturdy. You can use whatever paint you want (I use spray paint) but if you're using Rustoleum I'd say avoid the gloss. Otherwise use whatever you want...
  3. Keirstin Bloom

    Loading...

    I haven't had to use a bank account for portablizing, and I don't have a job either. Yet I fund everything I make myself. Mow a lawn, petsit, do some chores, or find another way to raise the money. I customize consoles and sell them, but before that, I hunted through craigslist and bought cheap...
  4. Keirstin Bloom

    Loading...

    How cheap exactly? You're not going to make a portable for much less than that, especially on your first try
  5. Keirstin Bloom

    Loading...

    That picture he posted is of the fan. It says 5vdc on the wii fan itself.
  6. Keirstin Bloom

    Custom GBA buttons?

    Have you tried painting them? Testors and Tamiya paint with clear coat is solid and feels great.
  7. Keirstin Bloom

    Loading...

    Question: what color wire is usually negative?
  8. Keirstin Bloom

    Loading...

    Yep. You can also use the stock trim, regulators, housing, cables, and firmware.
  9. Keirstin Bloom

    Loading...

    Wat. Why are your abxy buttons on the left?
  10. Keirstin Bloom

    Loading...

    GC+ Lcd Some buttons A rotary tool Glue / epoxy Batteries Paint Clear coat Bondo glazing and spot putty Soldering iron PCM Joysticks Audio amplifier Speakers TI regulators L and R buttons Hard and soft tact switches Power plug Fan Heatsink Shielded wire for video
  11. Keirstin Bloom

    Loading...

    I'm guessing you never played red steel 2 :P
  12. Keirstin Bloom

    Loading...

    Before you ask a question, you need to ask yourself whether you've done all the searching you can. If you need a soldering iron, go to Amazon, type in "soldering iron", and then start reading reviews. If you need a headphone jack, go to ebay, type in "headphone jack pcb" and find a switching...
  13. Keirstin Bloom

    Loading...

    Those aren't ds lite buttons, and you'll just have to get them and find out. Some things you just have to try out yourself As for your list, you're forgetting some important stuff: Headphone jack Magnet wire Port for charging Hard tacts Heatsink Fan Switches for power and whatever else Ir...
  14. Keirstin Bloom

    Loading...

    Probably like $300 or close to it.
  15. Keirstin Bloom

    Loading...

    95% of the games could be dora the explorer, but they don't matter unless you're playing them. It's about the 5% and how good those were. That's why I have 10x more crappy GameCube games laying around than I have good GameCube games. That doesn't make it a lame console by any means, it just...
Back
Top