N64 portable batteries

[MODDEDbyME]

how much voltage would i need to run a n64 and a s1 screen for 3 hours and could i use 2 of the camera batteries? thanks

 

[Snipeye]

FFS, I swear I'll make a php script or something to determine various battery life calculations... anyway:

Depends on whether your using expansion pak or jumper pak - jumper, for simplicities sake, draws about 1Ah, expansion 1.5Ah. (On 3.3v) - If you use the pth, it's about 90% efficiency, so if you also add in the screen + 12v line of the n64, It'll be ROUGHLY:

Jumper: 1Ah/Hour, so 3000mAh @ 7.4V will work

Expansion: 1.25Ah/Hour, so 3750mAh @ 7.4 should work.

 

[dsv101]

I know i have nothing to do with this post, but this is helpful, i need to find some sheap batts & charger & protection circuit & money, lol

 

[dsv101]

also, would this work http://cgi.ebay.com/7-4V-4000mAh-15C-2S ... 2eb161a893
and would this charge it http://cgi.ebay.com/Li-Po-battery-balan ... 4aa7662c17

 

[Snipeye]

Looks like it, but the battery looks a little bit bulky for a portable...

 

[dsv101]

it would be temporary until i scraped up cash.

 

[FierceDeity]

What are "the camera batteries"? Also, these are very good batteries.

 

[Glofish]

I have a question about the battery wiring. I have gotten everything connected and put together including the batteries and their respective protection board and I go to solder the last connectio, to hook up the battery to the protection board and it starts sparking and the wire gets hot. What am I missing?