Builing a PS1 Portable

[Jim Carrrey]

Hello, I'm kind of new to portablizing things. I really want to build a PS1 Portable but so far all I have done is wire the PS1 to the Screen I have, if anyone has any tips then thank you. Also if anyone knows where I can get a good NiMH battery that would be appreciated/

 

[Basement_Modder]

I knew it would only be a matter of time before we started getting celebrities here, Jim. XD

Try the radioshack pack if you want cheap Ni-Mh.

 

[Jim Carrrey]

I knew it would only be a matter of time before we started getting celebrities here, Jim. XD

Try the radioshack pack if you want cheap Ni-Mh.

Looks good, thanks.

 

[Jim Carrrey]

Hmm I found a list of the things I need for a PSp please tell me if I truly need certain items or not

1.PSOne system, LCD screen, and controller
2.Multi-meter
3.Soldering iron, and rosin core solder
4.De-soldering Iron / De-soldering Braid
5.Black Tape
6.Screwdrivers –Standard and Phillips Head
7.Dremel / Rotary Tool- Cutting edge, sander bits, etc...
8.Wire- you determine which size you need... I suggest thicker for power, and thinner for things like the controller and video/audio
9.Razor Blade
10.Drill with bits
11.Small Pliers
12.Pencil
13.Contour Putty
14.Fine Grit Sandpaper (300 – 400 grit) (Emory paper)
15.Helping Hands / Magnifying Glass (optional) Needed for over-clocking
16.(4) Spring loaded NO (Normally Open) switches
17.(1) SPDT Mini Toggle switch, 3 pins, no off position, (on – on)
18.SP/ST switch. (on – off) For power.
19.Breadboard (Empty circuit board you can solder onto yourself)
20.5V Mini Fan (Cools the CPU in both normal and over-clock mode) optional