custom computer desk

Discussion in 'Projects' started by modder420, Jul 26, 2016.

  1. modder420

    modder420 Member

    I i'm i the process of upgrading my work area and i needed a desk to go with my new gaming chair.the desk will have a built in pc and a file server to send files to all of my machines and other pcs on my network.i did not want to spend a ton on the build so i will be making the entire project from spare parts and wood left over from other builds.the desk needs to be self contained and mobile as my work area is small.so far i have the frame built and i will be spending the day mapping out the electronics.here is a few shots of the build so far.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
    [​IMG]
    [​IMG]
     
    ttsgeb likes this.
  2. modder420

    modder420 Member

    here is a update.i got the legs installed the desk is on wheels to move it with ease.motherboard tray is installed.next i will map out where i want everything to go.

    [​IMG]
    [​IMG]
    [​IMG]
     
  3. samjc3

    samjc3 #1 Female Member

    Looks pretty good so far. I must admit though, I've always been against PC-Desk builds because the desk ends up so thick compared to a normal one. Still, neat project, and looks well put together.
     
  4. modder420

    modder420 Member

    well i started work on the front panel of the desk today.i cut the holes for the fan controller and media hub display and the dvd drive.i still have to cut ports for the usb and mic and headphone jacks.the power and reset buttons are led backlit and will act as both buttons and power led and hdd led.check the video for the details and please subscribe to the channel for updates.
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  5. modder420

    modder420 Member

    so here is a quick update i got a lot done on the front panel.added holes for intake fans and usb and audio ports.i also made a dvd cutout for the other side of the desk until i decide what i want to put there.the false floors for the motherboard trays are both cut and installed.i 3D printed some custom fan grills and will be mapping out the motherboard in my next update.check the video link for a video update and please subscribe to the channel to stay up to date and smack that like button.
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  6. modder420

    modder420 Member

    So I got a lot done today.the desk is wrapped in carbon fiber and I installed RGB LEDs to the legs. Next I will put on all the logos and graphics. Then make the covers for the front of the legs out of plexi glass.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
    ttsgeb likes this.
  7. ttsgeb

    ttsgeb Breaker of Everything Staff Member

    Oh man, I'm really digging those light up legs. That's an awesome idea!
     
  8. modder420

    modder420 Member

    ok so i got the custom leg covers done waiting for them to dry fully to clear coat them.they are made out of plexi glass the goal was to make them look cool and follow the theme im going for.the name will light up thanks to the rgb led strips.see demo and details in the video.and please subscribe to the youtube page.



    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
    ttsgeb likes this.
  9. modder420

    modder420 Member

    ok so i got the leg covers installed and wired up all the leds.then i started wrapping all of the parts being used in the desk with carbon fiber.next i will start on the back covers and install the monitor stand.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  10. modder420

    modder420 Member

    got bot lcds done and two 140mm fan grills for the front of the desk.

    [​IMG]

    [​IMG]
     
  11. frostedfires

    frostedfires Member

    Dang dude this is one sweet set up! You've always been such a brilliant modder. :)
     
    modder420 likes this.
  12. Element18592

    Element18592 Member

    Very nice! Its pretty amazing the difference a vinyl wrap can make to the appearance. Great job man.
     
    modder420 likes this.
  13. modder420

    modder420 Member

    well i got the lcds and mount installed to the desk.Now i have to start making the back marquee panel.all the 3d printed fan grills are made.My mesh filters and sponsored peripherals should be here wendsday.

    [​IMG]

    [​IMG]

    [​IMG]
     
  14. modder420

    modder420 Member

    thanks bro
     
  15. modder420

    modder420 Member

    thanks dude this project has been kicking my ass lol.made so many mistakes and had to redo alot of stuff.but its starting to look awesome now.almost dont want to put it in my shop gonna have to make one more for my gaming pc in the future.the vinyl wrap was my girls idea i was gonna paint it but im glade i did not.
     
  16. modder420

    modder420 Member

    well i got alot done the back marquee is complete.i wired up all the leds and installed the pc.the front panel has all been installed.next i will start preeping the xbox to be installed.it should not be to munch longer before im done.check the video link for a quick demo.and please subscribe to the channel.



    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
    ttsgeb likes this.
  17. modder420

    modder420 Member

    quick update got the art work installed on the sides of the desk i made custom ROG logos with traces.starting the xbox install after my wrestling match tomorrow.i know this is off topic but if you wanna see what i do as my real job check out my new highlight video.

    [​IMG]

    [​IMG]

    [​IMG]
     
  18. modder420

    modder420 Member

    Quick update i got the xbox installed and most of the artwork done.i tsop flashed the xbox and installed a 2tb hdd full of games and emiulators.next i will start on the covers for the hdd and cords then install the glass top.check out the video link to see the progress.

     
  19. modder420

    modder420 Member

    here is the finished desk.i think it came out great for just using stuff i already had and scrap wood.check out the video and i will be posting one more video of the specs in my shop tour video.please subscribe to the channel thanks guys.

    [​IMG]
     
  20. Kickback

    Kickback Teen Idle Staff Member

    Wait you are Ruckus?

    No *Can'tSayThisOnTV*ing way hahaha